wehrmacht awards


Go Back   Wehrmacht-Awards.com Militaria Forums > Ken Jasper International Militaria Forums > Bundesrepublik Deutschland, 1949-Present

Bundesrepublik Deutschland, 1949-Present From West Germany through to the modern reunified German Republic.

Reply
 
Thread Tools Display Modes

Commonality of parts between LL 1A1 and GSG9 Para Helmets?
Old 07-21-2019, 01:29 AM   #1
peregrinvs
New Member
 
peregrinvs is offline
Join Date: Oct 2005
Location: Herts, UK
Posts: 40
Default Commonality of parts between LL 1A1 and GSG9 Para Helmets?

Hi,

I have a lightly rusted and empty GSG9 helmet shell incoming that I’m intending to at least repaint and ideally fully restore.

First question: Are there any sources of separate liners, bolts or chinstrap assemblies for these?

I assume probably not, so...

Second question: Did the LL 1A1 para helmet use the same liners and bolts? They look externally similar in pictures, but I haven’t found a direct comparison of dismantled helmets. Yes, you guessed it - I was wondering if a scruffy / incomplete LL 1A1 could be a parts donor.

Third question: (apologies if it’s a stupid one) Did the LL 1A1 and GSG9 helmets have different shell + liners sizes as did the WWII helmets?

Thanks,
Mark
  Reply With Quote

Old 07-23-2019, 05:21 PM   #2
Collectinsteve
Member
 
Collectinsteve is offline
Join Date: Nov 2009
Location: New England
Posts: 2,125
Default

Hi Mark,

Everybody needs a restoration project or 10 to keep them out of trouble

I think you could make it work. The two do look very similar to each other in terms of the liner, the screw bolts, and the strap color. You won't get the chin cup with a BW helmet, but otherwise pretty close.

I think the main problem is going to be matching the sizes. Yes, the shells of both helmets come in different sizes. Which means you will need to find a BW helmet of the same size in the right condition at the right price.

Here's a small one for sale:

http://www.militaria-arsenal.de/BW-F...irmjaeger-Helm

Steve
  Reply With Quote

Old 07-25-2019, 07:19 AM   #3
peregrinvs
New Member
 
peregrinvs is offline
Join Date: Oct 2005
Location: Herts, UK
Posts: 40
Default

Quote:
Originally Posted by Collectinsteve View Post
Hi Mark,

Everybody needs a restoration project or 10 to keep them out of trouble

I think you could make it work. The two do look very similar to each other in terms of the liner, the screw bolts, and the strap color. You won't get the chin cup with a BW helmet, but otherwise pretty close.

I think the main problem is going to be matching the sizes. Yes, the shells of both helmets come in different sizes. Which means you will need to find a BW helmet of the same size in the right condition at the right price.

Here's a small one for sale:

http://www.militaria-arsenal.de/BW-F...irmjaeger-Helm

Steve
Hi Steve,

In my case it's a restoration project or 20...

According to the seller, the shell measures about 68cm around the outside in line with the holes. Presumably I would need a size 60 or 61 liner? I suppose another approach might be to get a smaller one and then try and figure out a reversible way of fitting it to the larger shell as a place holder.

Cheers,
Mark
  Reply With Quote

Old 07-31-2019, 08:35 AM   #4
Collectinsteve
Member
 
Collectinsteve is offline
Join Date: Nov 2009
Location: New England
Posts: 2,125
Default

Mark,

I just remembered that I have a spare chinstrap, bolts, and standard (not FJ liner. I will have to check on the size of the liner.

Now, the interesting thing is the straps are black leather. The common type is green leather that more-or-less matches the helmet color. However, I am suspicious that at some point (early?) black straps were used. Ironically, here's one on eBay right now:

https://www.ebay.com/itm/223605737460?ul_noapp=true

Ignoring the fact that someone tried to make this into a wartime helmet, the black straps are readily apparent and do not look like repros. My set is also apparently original. In fact, I have a second spare set black of straps (no screws) that looks original too.

Soooooo... does anybody know if black straps were ever used on the GSG-9 helmet?

Steve
  Reply With Quote

Old 08-03-2019, 04:10 AM   #5
Reibert-Austria
Member
 
Reibert-Austria's Avatar
 
Reibert-Austria is offline
Join Date: Oct 2007
Location: Salzburg (Austria)
Posts: 1,972
Default

Quote:
Originally Posted by Collectinsteve View Post
...

Soooooo... does anybody know if black straps were ever used on the GSG-9 helmet?

...
Steve, I do own several of such "M38" -pattern helmets, manufactured for the GSG9, and, for SEK´s, (and, I have seen many more ! ).
All of them show green chinstraps.
I´ve never, ever, seen black ones !

But, the Bundeswehr also used several "M38" -pattern helmets, close to the GSG9/SEK -helmets.
They´re showin´ black chinstraps, some BW models also green ones.

Best regards,
R.
  Reply With Quote

Old 08-03-2019, 06:36 PM   #6
Collectinsteve
Member
 
Collectinsteve is offline
Join Date: Nov 2009
Location: New England
Posts: 2,125
Default

Good to know! I also have never seen a GSG-9 helmet with black straps, but they are the most numerous helmet out there and it seems spare black straps can be found. I thought maybe the two were related.

I've seen black straps on some of the less common BW TrVsu helmets, but I thought the most common type (M38 style) always had gray straps. I looked through my collection of pictures and that's all I see.

Steve
  Reply With Quote

Old 08-07-2019, 09:39 AM   #7
peregrinvs
New Member
 
peregrinvs is offline
Join Date: Oct 2005
Location: Herts, UK
Posts: 40
Default

Thanks for the replies. I’ve received the shell and have cleaned off the rust prior to a repaint. The seller threw in some West German fire helmet liner bolts, but they’re really more for looks than functionality. For fun I’ve posed it with an example of the alleged Versuchshelm which I’ve put on here before. They are almost identical.

All leads on parts gratefully received.




Last edited by peregrinvs; 08-07-2019 at 10:24 AM.
  Reply With Quote

Old 08-07-2019, 11:28 AM   #8
peregrinvs
New Member
 
peregrinvs is offline
Join Date: Oct 2005
Location: Herts, UK
Posts: 40
Default

Quote:
Originally Posted by peregrinvs View Post
Thanks for the replies. I’ve received the shell and have cleaned off the rust prior to a repaint. The seller threw in some West German fire helmet liner bolts, but they’re really more for looks than functionality. For fun I’ve posed it with an example of the alleged Versuchshelm which I’ve put on here before. They are almost identical.

All leads on parts gratefully received.




Last edited by peregrinvs; 08-07-2019 at 11:28 AM. Reason: Trying to post photos...
  Reply With Quote

Old 08-08-2019, 09:14 AM   #9
peregrinvs
New Member
 
peregrinvs is offline
Join Date: Oct 2005
Location: Herts, UK
Posts: 40
Default

Hmmm... Not sure why my pictures aren't displaying. I *think* this is a link to the album on Google Pictures:

https://photos.app.goo.gl/5RRVXvTPK8Kk7q8U7
  Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






vBulletin skins developed by: eXtremepixels
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright Wehrmacht-Awards.com