wehrmacht awards

Go Back   Wehrmacht-Awards.com Militaria Forums > Wehrmacht Uniforms and Equipment > Communications Equipment

Communications Equipment Radio, telephony and radar equipment

Thread Tools Display Modes

Reproduction Feldfu
Old 06-02-2018, 01:19 AM   #1
mroeding's Avatar
mroeding is offline
Join Date: Jun 2007
Location: New York
Posts: 50
War Reproduction Feldfu

Here is my completed radio set. The set was an assembled cast resin kit from Brad Blondett. The castings of the kit was not that bad. I disassembled the unit and rebuilt it again after a few modifications of my own.

• Removed all the accessories (Y Strap Hooks, Side Cover, Audio Jacks)
• Disassembled the resin components from the MDF and poplar pieces.
• Stripped paint off of all pieces.
• Squared and trimmed edges of all pieces on the table saw.
• Cut off antenna base and "d" ring castings from top piece
• Built a 5 sided wood box out of birch and pine plywood using rabbet joints.
• Glued (contact cement) and screwed top and bottom pieces to wood box, applying clamp pressure.
• Glued (contact cement) side pieces to wood box, applying clamp pressure.
• Used two part epoxy cement to seal all seems and fill in any holes.
• Sanded all seems and holes smooth.
• Fabricated straps out of sheet metal for "d" rings and carrying handle, attached with screws, filled in slots with epoxy.
• Made faceplate dial out of plastic gear from discarded toner cartridge.
• Turned antenna base out of pine on lathe, painted black and screwed to top.
• Painted housing with gray primer 3-4 coats.
• Painted housing with Panzergrau (1944 Militaria) 3-4 coats.
• Painted faceplate with brown paint 1 coat, used paint pen to write-in texts, attached with screws to box.
• Attached leather strap (made from old French "Y" straps) and bumpers (2 on front, 2 on back).
• Installed two flat hooks on bottom (purchased from Lowe's).
• Made carrying handle out of canvas webbing with riveted metal tips.
• Reinstalled side access cover, reinstalled locking latch that came with kit.
• Cut out stencils, used flat black paint.
• Reinstalled "y" strap hooks, audio jack and antenna that came with kit.
• Attached a modified old headset (made during my Torn fu d2 build).
• Finished unit weighs just over 9 pounds.

I have a second cover that is identical to the right side I will have to make some modifications such as a switch access port and the two white message squares.

The build took me about 5 weekends and much easier than the Torn fu d2 or Torn eb. I just have to finish the second cover and try to find someone that casts the throat mikes from resin.

Hope this helps anyone trying to build one.

[/IMG]https://scontent-ort2-1.xx.fbcdn.net/v/t1.0-9/34318301_10212649583773888_236242923769823232_n.jp g?_nc_cat=0&oh=7c5b5523cf4353d541f853b519b3a73a&oe=5BB3771D[/IMG]

  Reply With Quote

Old 06-02-2018, 01:59 PM   #2
Funksammler is offline
Join Date: Jan 2009
Location: Normandy
Posts: 2,968

Well done, a lot of work gone into it. My main critisism would be the frequency dial, it does not look like the original. Also the frequency selector switch was of a pointed shape rather than round (only the Feldfu.f has a round frequency dial):


  Reply With Quote

Old 06-03-2018, 12:48 PM   #3
Oscha's Avatar
Oscha is offline
Join Date: May 2008
Location: Southern California
Posts: 81

I have a faceplate with the correct dial on the way. The next mold will have better detail with the correct knob.
  Reply With Quote


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

vBulletin skins developed by: eXtremepixels
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright Wehrmacht-Awards.com